Designed and manufactured in New Zealand, the Skellerup Reflex Export range is made from Skellerup’s proprietary rubber formulation for longevity and quality. Skellerup Reflex dairy rubberware range has been trusted by New Zealand dairy farmers for over 60 years.
Previously known as Conewango Export, Skellerup Reflex milking liners are now available for export to dairy farmers worldwide. The Skellerup Reflex Export range meets New Zealand safety standards and the BfR recommendation XXI.
Wholesale enquiries
For wholesale enquiries outside New Zealand, please contact the Skellerup Dairy international team.
Previously known as Conewango Export, Skellerup Reflex Export milking liners are manufactured in New Zealand by Skellerup.
- Manufactured to the highest standard by Skellerup using a proprietary rubber formulation
- Skellerup Reflex is known and trusted by New Zealand farmers for over 60 years
- Meets the BfR recommendation XXI; the recognised standard for all countries except USA
- Optional vent featured on the short milk tube for a cleaner vacuum chamber, minimal air turbulence and reduced foaming
- Bulk packed in cartons as part of Skellerup and their customers’ sustainability initiatives
- Skellerup Reflex Export range of MR-T milking liners is our fastest growing export range
For wholesale enquires outside of New Zealand, contact us for more information.
- Triangle barrel
- Shut-off milking liner
- Product code: RIE1164
- Triangle barrel
- Shut-off milking liner
- Features a vent on the short milk tube for a cleaner vacuum chamber, minimal air turbulence and reduced milk foaming
- Product code: RIE1164V
- Triangle barrel
- Product code: RIE1166
- Triangle barrel
- Features a vent on the short milk tube for a cleaner vacuum chamber, minimal air turbulence and reduced milk foaming
- Product code: RIE1166V
| Product Code | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) |
| RIE1164 | 23 | 312 | 130 | 29 | 9 |
| RIE1164V | 23 | 312 | 130 | 29 | 9 |
| RIE1166 | 23 | 320 | 130 | 29 | 10 |
| RIE1166V | 23 | 320 | 130 | 29 | 10 |
| Product code | Product description | Shell and claw compatibility | Units per carton |
|---|---|---|---|
| RIE1164 | Reflex Milking Liner MR-T10-E | Impulse Air shell; Fits square cut nipples with 12-13mm OD | 100 |
| RIE1164V | Reflex Milking Liner MR-T10-V-E | Impulse Air shell; Fits square cut nipples with 12-13mm OD | 100 |
| RIE1166 | Reflex Milking Liner MR-T15-E | Impulse Air shell; Fits angled cut nipples with 12-14mm OD | 100 |
| RIE1166V | Reflex Milking Liner MR-T15-V-E | Impulse Air shell; Fits angled cut nipples with 12-14mm OD | 100 |
Liner shape, tension and inner surface condition deteriorates over time affecting their milking performance. If you pass 2,500 milkings, your liners may show:
- Flex cracking in the barrel. Increased risk of liners splitting. Bacteria growth in flex cracks can contaminate milk and impact your grade.
- Mineral deposit build-up. Mineral deposits lead to an abrasive liner surface, damaging teats and increasing the risk of infection.
- Liner mouthpiece and barrel distortion. The result of swelling from milkfat and chemical absorption. Liner tension is critical for pulsation and maintaining a high flow rate from the teat while stimulating milk flow. Incomplete milk out can contribute to higher somatic cell counts (SCC) and an increased risk of mastitis. Worn-out liners lead to lost performance due to cup slip and increased average milking time.